10% OFF Your Purchase With Code TAKE10 Expires 11/20/19 | See Exclusions

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

Zipp QuickView TT Computer Mount
$22.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
XLC Quick Mount Fender set 45mm
$14.99 $29.99 50% Off
Quick release fender set- 45mm wide Works with many tires up to 32mm (Fit may vary by tire and frame)
White Lightning Epic Ride
$9.50
White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!
Wheels Manufacturing Inc. 29mm SRAM DUB Open Bore Adapter
$9.99
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
Wheels Manufacturing Inc. Bottom Bracket Sealed Bearing Extractor Set
$99.00
- Bearing extractors set for pushing out 22mm, 24mm, and 30mm ID sealed bearings from bottom bracket cups. - Compatible with Wheels Mfg. 1/2" threaded rod press and handles (PRESS-7 and PRESS-7-PRO). BB-EXT Includes (1) 30mm ID sealed bearing extractor (1) 24mm ID sealed bearing extractor (1) 22mm ID sealed bearing extractor (1) 52mm receiver cup (1) 44mm receiver cup sleeve (1) 42mm receiver cup sleeve (1) 39mm receiver cup sleeve (1) bearing pusher shaft
Wheels Manufacturing Inc. Bottom Bracket Socket
$49.00
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
Wheels Manufacturing Inc. Bushing Removal Tool
$60.00
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red
Wheels Manufacturing Inc. Double End BB Wrench
$23.50
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
Wheels Manufacturing Inc. Economy Bearing Press
$39.00
An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors
Wheels Manufacturing Inc. Headset Cup Press
$125.00
Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters. The other drift is two-sided to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings. - Machined aluminum handles and drifts - Red anodized drifts and handles - Zinc-plated 1/2" diameter threaded rod - Long threaded rod works with long head tubes up to 250mm - Includes one Head Tube Drift - Includes one Headset Cup Drift - Laser etched for easy identification - Made in the USA
Wheels Manufacturing Inc. Hub Bearing Installation Drift Set
$84.00
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
Wheels Manufacturing Inc. Over Axle Bearing Press Adapter Kit
$185.00
- Works in conjunction with Wheels Mfg sealed bearing press (BTI #WZ-9991) to install 10mm ID and larger bearings into hubs with shouldered axles, always pressing simultaneously on both the inner and outer race of the bearing and preventing damage during the installation process - Includes adapters for 12 different bearing sizes ranging from 10mm to 20mm: 6900,6000 (10mm ID); 6901,6001 (12mm ID); 6802,6902,6002 (15mm ID); 6803,6903,6003 (17mm ID); 6804,6904 (20mm ID) - Made in the USA
Wheels Manufacturing Inc. PRESS-1 Handle & Rod Assembly
$55.00
Replacement handle assembly for Wheels Mfg. large sealed bearing press (PRESS-1). Primarily designed for pressing bearings into hubs. Note: rod diameter is smaller than the hole size in Wheels Mfg. universal bottom bracket drift. Includes: - Machined fixed end aluminum "T" handle with brass insert - Machined non-fixed end aluminum "T" handle with brass insert - 3/8" x 12TPI threaded rod - M5x12mm flat head screw to secure fixed-end handle to rod
Wheels Manufacturing Inc. Professional Bottom Bracket Tool Kit
$250.00
This is Wheels Manufacturing's new toolkit for installing, removing, and servicing Wheels Manufacturing bottom brackets. The kit includes their new bottom bracket socket tools for installing and removing Wheels Mfg. BB cups with the following spline patterns: 48.5mm 16-notch, 44mm 16-notch (may be compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ and FSA). It also includes sealed bearing extractors for 22mm, 24mm, and 30mm ID bearings. Includes - T-Handles with 1/2" threaded rod - (2) Universal bottom bracket drift (BB-OB) - (1) 48.5mm/44mm, 16-notch Bottom Bracket Socket - (1) 48.5mm, 16-notch Single Sided BB Socket - (1) 30mm ID sealed bearing extractor - (1) 24mm ID sealed bearing extractor - (1) 22mm ID sealed bearing extractor - (1) receiver cup - (1) 44mm receiver cup sleeve - (1) 42mm receiver cup sleeve - (1) 39mm receiver cup sleeve - (1) bearing pusher shaft - (1) 3/8" to 1/2" square drive adapter - Wood base
Wheels Manufacturing Inc. Professional Universal Bottom Bracket Press
$75.00
Professional, shop-quality, version of the Wheels Mfg Universal Bottom Bracket Press, but with larger handles and brass inserts in the handle faces. Easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. No more searching for the correct size drifts and parts. Just match up the drift to your frame's BB shell size and your bottom bracket's bearing size and press. 1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight. Drifts can also be used as a frame bottom bracket shell sizing guide! - Machined aluminum handles and drifts - Brass inserts in the tool faces allow each handle to turn freely against drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Zinc-plated 1/2" diameter threaded rod - Works with BB shells up to 132mm wide Fits: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm) - 22/24/30mm inner bearing diameters
Wheels Manufacturing Inc. Sealed Bearing Extractor Set
$240.00
This Wheels Manufacturing Sealed Bearing Extractor Set removes sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch. - 12-piece set (Individual replacement extractors and parts are also available) - Made in the USA Set includes: - (1) Clear Plastic storage container - (1) 8mm ID Bearing Extractor - (1) 9mm ID Bearing Extractor - (1) 9.5mm ID Bearing Extractor - (1) 10mm ID Bearing Extractor - (1) 12mm ID Bearing Extractor - (1) 15mm ID Bearing Extractor - (1) 17mm ID Bearing Extractor - (1) 20mm ID Bearing Extractor - (1) 22mm ID Bearing Extractor - (1) 24mm ID Bearing Extractor - (1) 25mm ID Bearing Extractor - (1) 30mm ID Bearing Extractor - (1) Spare parts bag containing bolt sets for extractors
Wheels Manufacturing Inc. Sealed Bearing Press
$325.00
- Installs 16 bearing sizes including 3 different bottom bracket bearings: 2437, 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904 - Includes T-handles with Acme threaded rods, wood base with dowels for holding adapters, 16 bearing installation drifts, 3 "speed spacers" and 2 linkage offsets for full suspension bearing installation - Made in the USA
Wheels Manufacturing Inc. Small Sealed Bearing Press
$200.00
Another indispensable tool for the professional bike shop, the Wheels Manufacturing Press-2 works with bearings that have an I.D. of 10mm or smaller (most front hub sealed bearing fall in this range). It features an aluminum base with 9 open bore and over axle adapters, and a quick release skewer. - Installs sealed bearing sizes 6801, 6802, 6803, 6900, 6901, R6, 688, 608, 609 - All parts are laser etched for easy identification
Wheels Manufacturing Inc. Universal Bottom Bracket Press
$45.00
This do-it-all universal bottom bracket press is designed to press in all current Wheels Mfg. bottom brackets. Economical and easy to use, this tool is made up of two machined aluminum handles, a 1/2-inch threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters. No more searching for the correct size drifts and parts—just match up the drift to your frame's BB shell size and your bottom bracket's bearing size, and press away. - Zinc-plated 1/2-inch diameter threaded rod resists bending, allowing for the cups to align and press in straight - Drifts can also can be used as a frame bottom bracket shell sizing guide - Machined aluminum handles and drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Works with BB shells up to 132mm wide - Includes two universal BB drifts
Wheels Manufacturing Inc. Wheels Bench Cartridge/Ball Bearing Ruler
$60.00
- Anodized aluminum construction. Includes mounting hardware - Measures the diameter of loose ball bearings - Measures the inner and outer diameter of cartridge bearings - Metric and Standard measurements
Wald Training Wheels 252
$27.99
- Steel wheels - For riders up to 100lbs - Fits 12" - 20" wheel bikes
Wald Wald Training Wheels 10252
$26.99
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
Wald Wald Training Wheels 1216
$24.99
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
Wald Wald Training Wheels 742
$26.99
Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds.
Wahoo ANT+ USB with Extension Cord
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
Wahoo Blue SC Speed/Cadence Sensor (BT/ANT+)
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
Wahoo ELEMNT BOLT GPS Bike Computer
$249.99
ELEMNT BOLT is the first, fully aerodynamic GPS bike computer! Its patent-pending design creates an integrated system of computer and mount which results in a CFD (Computational Fluid Design) tested, highly aerodynamic system built to be on the front of your bicycle. Equipped with Bluetooth Smart and ANT+ dual-band technology, ELEMNT BOLT pairs seamlessly with all of your cycling sensors. It works with our free ELEMNT companion app which allows you to set up your data fields, customize profiles, track performance, and share ride data effortlessly—no more confusing menus! Plus, programmable LED QuickLook Indicators provide a quick way to see if you're on pace with important performance metrics like speed, heart rate, and power. Designed for performance and engineered for simplicity, the ELEMNT BOLT GPS bike computer helps make every second count. Lastly, the Bolt is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. - Wahoo worked with world-renowned aerodynamic cycling expert Dimitris Katsanis to create a performance-driven bike computer. Designed as a system, the ELEMNT BOLT unit and integrated out-front mount becomes a CFD tested, highly aerodynamic system that is built to be on the front of your bicycle. - Includes a locking screw that riders can use to secure the computer to the mount. When utilized, the ELEMNT BOLT may remain on the bicycle for weigh-ins for UCI races. - A truly wireless bike computer with no plugin required (expect to charge it)! There's no need to connect to your laptop to sync ride data, download maps, or update software. All of this can be done via WiFi, Bluetooth, or ANT+. - The free ELEMNT Companion App effortlessly guides you through a step-by-step set-up so that you can create customized user profiles, track performance, update maps and firmware, and share ride data effortlessly. - Integrated GPS with simple, crisp maps so you're ready wherever you are in the world. - 2.2" (56mm) diagonal display size that is larger than the leading competitor, so all your data and routes are easy to see. - There's a page for every element of your ride: a workout view with a complete look at performance metrics, a climbing view to track ascents in real-time, a map view to stay on course, live tracking, and more. All screens are fully customizable from within the ELEMNT Companion App. - Two sturdy and secure mounting options—aerodynamic out-front and stem—so that you can see your ride where you want.
Wahoo ELEMNT BOLT GPS Bike Computer Bundle
Get everything you need to boost your cycling performance all at once! The ELEMNT BOLT features a patent-pending design that integrates the bike computer and mount, resulting in a CFD tested, highly aerodynamic system built to be on the front of your bicycle. Not to mention, it's super easy to set-up and customize with the free companion app and features dual-band technology, wireless connection & uploads, pre-loaded global maps and routes, and so much more. The TICKR heart rate monitor, RPM Speed sensor and RPM Cadence sensor pair seamlessly with the ELEMNT, so that you can get live and accurate performance metrics. Lastly, the Bolt is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. - The ELEMNT BOLT is the most integrated GPS bike computer on the market with a full list of compatible hardware and smartphone apps. - Two sturdy and secure mount options: an integrated out-front mount and a stem mount. - RPM Cadence comes with a crank and shoe mount. - RPM speed comes with a hub mount.
Wahoo ELEMNT GPS Bike Computer
Wahoo Fitness is breaking the GPS bike computer stereotype! Equipped with Bluetooth Smart and ANT+ dual-band technology, ELEMNT pairs seamlessly with all of your cycling sensors. No more confusing menus! ELEMNT comes with a free companion app that allows you to set up your data fields, customize profiles, track performance, and share ride data effortlessly. Plus, programmable LED QuickLook Indicators provide a quick way to see if you're on pace with important performance metrics like speed, cadence, and power. Simple to set up, simple to experience, simple to stay connected, simple to navigate, and simple to suffer—the ELEMNT GPS Bike Computer gives you the POWER you demand with the SIMPLICITY you expect! Lastly, the ELEMNT is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. - A truly wireless bike computer with no plugin required (except to charge it)! There's no need to connect to your laptop to sync ride data, download maps, or update software. All of this can be done via WiFi, Bluetooth, or ANT+. - The free ELEMNT Companion App effortlessly guides you through a step-by-step set-up so that you can create customized user profiles, track performance, update maps and firmware, and share ride data effortlessly. - Integrated GPS with simple, crisp maps so you'll ride wherever you are in the world. - In the ELEMNT Companion App, select Take Me To to enter a destination, address, or point of interest and to generate a route with turn-by-turn directions and sync it to the ELEMNT via Bluetooth. - Either directly on the ELEMNT or in the ELEMNT Companion App, selecting Retrace Route will provide turn-by-turn directions route you back to the starting point of your ride by reversing the route you just rode. - Save your favorite locations either directly in the ELEMNT Companion App so you can easily generate a route on the fly and get turn-by-turn directions to your frequently visited spots. - 2.7" (68.6mm) diagonal display size that is larger than the leading competitor, so all your data and routes are easy to see. - There's a page for every element of your ride: a workout view with a complete look at performance metrics, a climbing view to track ascents in real-time, a map view to stay on course, live tracking, and more. All screens are fully customizable from within the ELEMNT Companion App. ELEMNT ROAM is fully integrated with your favorite apps: - Strava: Track your Relative Effort and Live Segments, complete with progress status and the Final Push to help you crush your PR or the KOM. - Best Bike Split: Guides you during a race with power and speed targets specific to the course and your race plan. If the course route is loaded to your ELEMNT, you can also ride it indoors on any Wahoo KICKR trainer for advanced preparation. - Komoot: Turn-by-turn directions with pop-up and LED notifications for Komoot routes - Ride With GPS: Turn-by-turn directions with pop-up and LED notifications for Ride with GPS routes
Wahoo ELEMNT GPS Bike Computer Bundle
Get everything you need for your cycling adventures all at once! The ELEMNT is Wahoo's feature-rich, stand-alone GPS bike computer with wireless connection & uploads, live tracking, KICKR power trainer control, Strava Live Segments, global maps & routes, a fully customizable screen, rechargeable battery, and more. Most importantly, it's super easy to set-up with the free companion app. The TICKR heart rate monitor, RPM Speed sensor and RPM Cadence sensor pair seamlessly with the ELEMNT, so that you can get live and accurate performance metrics. Lastly, the ELEMNT is compatible with ANT+ Radar systems including the Garmin Varia—see the proximity of approaching vehicles on the screen in real-time. - The ELEMNT is the most integrated GPS bike computer on the market with a full list of compatible hardware and smartphone apps. - ELEMNT comes with three sturdy and secure options (out-front, stem, and aero). RPM Cadence comes with a crank and shoe mount. RPM speed comes with a hub mount.
Page 1 of 44 Next page