Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Burley Steel Hitch
$25.00 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
Mirrycle Mirrycle Mirror
$18.99
The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter
SRAM RED AXS Power Meter Spider
$599.00
- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
Bar Mitts Extreme Mountain/Commuter Pogies
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes
Bontrager Hollow 6mm Bottle Cage
$9.99
Formed using 6mm, hollow 6061-T6 aluminum tubing, this lightweight and economical cage has a durable powder coat finish designed to keep it looking good. Key features: - 6061-T6 aluminum rod with two-piece bracket - Durable powder coat finish - Special design fits over front derailleur bands - Hollow tubing eliminates 15g without loss of strength
Burley Ballz Thru Axle
$59.99
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
Topeak Road Morph G
$44.95
Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.
Bontrager Comp Multi-Tool
$9.99
Everything you need Be prepared for roadside adjustments and minor repairs with the Bontrager Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - 2,2.5,3,4,5,6,and 8 hex along with Phillips, flat and T25 - Alloy sides for a sleek lightweight design - Material: Steel
Topeak SmartGauge D2
$39.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Garmin Varia RTL510
See and Be Seen, Day or Night - Provides visual and audible alerts to warn of vehicles approaching from behind up to 153 yards (140 meters) away - Tail light offers daylight visibility up to a mile away and is visible within a 220-degree range, so drivers can see you well before the radar sees the vehicle - Sleek vertical design easily mounts to most road-use bicycles, including racing, touring and commuter styles - Requires a dedicated radar display unit or wirelessly integrates with compatible Garmin devices (sold separately) - Battery life: up to 15 hours in flashing mode or 6 hours in solid or night flash mode Ride smarter and more aware with Varia RTL510 rearview radar. Mounted neatly on the seatpost, it provides visible and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. Plus, the bright tail light is visible in daylight from up to a mile away, so you can ride with confidence and peace of mind. General Specs: - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, night flash, day flash - Lumens: 20 solid, 29 night flash, 65 day flash - Battery life: 6 hours solid, 6 hours night flash, 15 hours day flash - ANT+: Yes - Water rating: IPX7 - Viewing angle: 220° In The Box: Non-Bundle - Varia RTL510 - Mounting Kit - Cables - Documentation
Mirrycle Incredibell Jellibell
$11.99
The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters
Burley Hitch Alt Adapter (3/8 x 26)
$17.99
Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side axle nut and once it's in place, the Burley hitch is installed to the adapter.
Topeak Alien II
$49.95
When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.
Bontrager Pro Keyed Chain Lock
$39.99
A keyed chain lock that provides pro-level protection through a durable 8mm hardened steel chain. Love your bike, lock your bike Bontrager has partnered with ABUS to offer best-in-class bike security. The Bontrager Pro Keyed chain lock provides secure keyed protection with an anti-drill key plate and industry-leading corrosion protection. The chain is made of 8mm hardened steel and covered in a fabric sheath to protect your bike frame and give it a nice finished look. Includes two keys. - 8mm temper-hardened steel chain links for secure protection in an 85cm length - Anti-drill plate at keyhole provides added protection against picking - Fabric sleeve for a classy look and feel that protects bike paint from scratching - Versatile linked chain design for quick and easy security - Industry-leading corrosion resistance - Includes chain lock and 2 keys (replacement keys available) - Security rating 7
SKS B65 Commuter II (Bluemel) Fender Set For 28-inch
$52.99
- SKS B65 Commuter II Fender Set for 28 - Famous Bluemel Full-Coverage Fender Set - Features stainless hardware and stainless 3.0mm stays - Front profile 680mm - Rear profile 1185mm - ASR security release system for the front wheel
Finish Line Fiber Grip Assembly Gel
$8.99 - $34.95
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Osprey Hydraulics 3.0L Reservoir
$42.00
Osprey’s Hydraulics 3L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
Portland Design Works Origami Rear Seatpost Fender
$22.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445 mm (7.5") - Weight: 160 g (5.6 oz)
Kryptonite KryptoLok Combo U-Lock
$52.95
The KryptoLok Combo U-lock is like a tough nut: you just can't crack it. Thanks to the 13mm hardened Performance steel shackle that resists cutting and leverage attacks, you get peace of mind while you run into the grocery store or lock up outside the coffee shop. A built-in four-digit resettable combination gives you easy unlocking and locking capabilities--no keys necessary! You can also take advantage of the Transit Flex Frame bracket for plenty of convenient mounting options. The KryptoLok Combo is 4 x 8-inches and has an anti-theft protection offer of $1,250.
Bar Mitts Mountain/Commuter Pogies
$74.95
A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes
Bontrager XXX Water Bottle Cage
$79.99
A cage that won't slow you down This OCLV carbon fiber cage is so lightweight you'll hardly know it's there. (That is, until you reach down and remove your water bottle with ease.) Recommended for on-road use with small water bottles. - Strong and lightweight OCLV Carbon construction - Secure bottle retention designed for road bikes - Recessed bolts allow smooth bottle transition and better derailleur clearance - Includes lightweight alloy mounting screws - Weighs only 20g
Trek Voda Trek Vertical Water Bottle
$8.99 - $9.99
A premium water bottle that provides secure, leak-free hydration with a great in-hand feel and lasting freshness. The Voda Water Bottle gives you clean, consistent, at-the-ready hydration on any ride. It's made from recyclable, FDA-approved materials free from BPA, BPS, and Phthalates. Plus, it has a PopTop cap that's easy to open but offers secure closure and leak-free transport. Product details - Redesigned bottle and cap feature all-new materials for great feel and consistent closure - Free of BPA, BPS, and phthalates - PopTop's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle, cap, and removable seal are dishwasher safe and 100% recyclable - Long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA
Bontrager Speed Concept Between-the-Arms Mount Kit
$23.99
Small parts can be hard to keep up with. If you've lost pieces of the mounting hardware for your Speed Concept Water Bottle Cage, don't sweat it. You'll find all the replacement parts in this handy hardware kit. • Aluminum
Finish Line 1-Step Cleaner and Lubricant
$9.99 - $12.99
Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!
SKS B42 Commuter II
$31.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
SRAM SRAM Butter Grease
$40.00
SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!
Bontrager Elite Keyed U-Lock with Cable
$49.99
A keyed U-Lock and cable combo that provides secure protection with an easy to carry mounting bracket. The standard in security Bontrager has partnered with ABUS to offer best-in-class bike security. The Elite keyed u-lock features a 9mm soft-touch steel shackle that resists cutting and double-bolting lock action for added anti-twist protection. Add in industry-leading corrosion protection and a double layered key cylinder and you get lasting protection with a durable, secure u-lock. Includes on-bike mount, cable, and two keys. - 9mm temper hardened steel for secure, versatile U-Lock protection with the included cable - Double bolting shackle provides anti-twist protection - Premium double-layered cylinder core provides added protection against picking - Soft-touch coating for a smooth look and feel that protects the bike from scratches - Simple mount installs in seconds for simple, versatile on-bike storage - Industry-leading corrosion resistance - Includes U-Lock, bike mount, cable, and 2 keys (replacement keys available) - Security rating 8
Burley Coho 16+ Wheel Kit
$89.99
The Coho 16+ Wheel Kit sports a 16 x 3-inch knobby tire, offering superior handling on unpaved surfaces including gravel, sand, and snow. Now, nothing can stop the Coho XC from coming along for the ride. A wide range of acceptable tire pressure lets you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps. - Specially designed for the Coho XC - Aluminum rim & hub - Stainless steel spokes - Knobby tread for superior handling - Quick release wheel
Osprey Siskin 12
$110.00
Designed to do it all—and hold just enough gear—the Siskin 12 is a mountain biking pack with many of the high-performing features you'd expect from Osprey. The mesh-covered AirScape backpanel provides excellent ventilation and maximum range of motion—go ahead, get sendy. A LidLock attachment on the front of the pack can store a standard size helmet while side compression straps expand to hold a full face helmet. The main U-zip compartment houses organization pockets for your bike tools and room for a layer, a sandwich, or some light mountain bike padding. Rolled, soft-edge shoulder straps keep the pack stable over technical terrain and ensure no pinching points when full. A dedicated compartment holds an included 2.5-liter reservoir and zippered hipbelt pockets provide easy access to bars during the ride or a bottle opener afterwards. VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability
Efficient Velo Tools EVT Safe Zone Helmet Mirror
$40.00
The Safe Zone Story The Safe Zone bicycle helmet mirror was invented by Brett Flemming, toolmaker, master bicycle mechanic and owner of Efficient Velo Tools LLC (EVT). Brett founded EVT in 1999 with the mission of building better bike tools. One day, as Brett ran a lathe in his machine shop, he came to a realization about the “Loc-Line ®” hose directing coolant at the cutting tool of his lathe. This coolant hose exhibited characteristics ideally suited as a design element in the perfect bicycle helmet mirror… it bent easily and stayed put! As a lifelong believer and retailer of helmet mounted mirrors, Brett was frustrated with the limited view, failed adhesives, flimsy plastic and bouncy wires that made existing mirror designs irritating. He designed this rugged mirror incorporating the “Loc-Line ®” hose elements, a very large mirror, and a mounting system that is clearly superior to competing products. Brett used the mirror on his commute to his “day job” as General Service Manager of the Bike Gallery in Portland, Oregon. Eventually, Bike Gallery’s head buyer noticed the mirror, and said “Why don’t you make some of those for us, and we will sell them?” The rest is history! Originally, Brett machined the base plate in his shop and assembled the mirror with nuts and bolts. This resulted in a mirror that was functional and sturdy, but homemade in appearance. To improve mount-ability, ease of assembly and appearance, the design evolved to an injection molded product it is today. When you purchase a Safe Zone Mirror you receive the highest quality helmet mirror on the market and the unbeatable personalized support direct from the manufacturer. Buy with confidence, and most importantly, ride safely.
Page 1 of 39 Next page