$11.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Featuring a foot activated high pressure / high volume switch. Details - Foot activated high pressure / high volume switch - Lightweight alloy base for stability - Corrosion resistant aluminum body and base - Smart head: presta & schrader ready - Hidden needle adapter & plastic valve adapter - 160 psi / 11 bar - Bar / psi analog gauge Specs - Pressure: 160psi / 11 bar - Warranty: 5 years
- For use with Bontrager CO2 cartridges - Regulator design provides safe, controlled operation - Reusable cartridge insulator keeps hands protected while inflating - Compact and lightweight design is easy to store for any ride - Spring-loaded mechanism regulates airflow for both Presta and Schrader valves
Easy inflation The convenience of CO2 with the ever-ready capabilities of a mini pump, the Air Rush Road combines safe, controlled CO2 inflation with the back-up security of a telescoping pump. At just 72g, the Air Rush's compact design easily fits in a jersey pocket or seat pack. Product details - 2-in-1 design combines CO2 inflator and mini pump - Ultra-compact size easily fits in a jersey pocket or seat pack - Includes reusable cartridge insulator to protect hands - Pump inflates tires if you're out of CO2 - 72g - Includes two 16g cartridges, mounting bracket, and required hardware
Show flats no fear with Bontrager's Air Support pump. Built for the lower-volume tires on your commuter, cruiser or town bike, but can handle road and mountain tires, the Air Support is great for topping off your pressures or fixing that unfortunate flat. The auto-select head uses a fold-out lever to lock securely to Schrader or Presta valves for quick and easy inflation up to 80 psi.
Bontrager's Air Support Road hand pump is a highly durable pump with a small volume chamber for quick inflation of higher-pressure tires up to 115 psi. The fold-out lever locks the pump head securely to the valve for consistent airflow into the tire. Use the included bracket to easily mount it under your bottle cage. Available in two lengths: Long for more air per stroke, or Short for an easy fit into a jersey pocket.
Keep it classy Extend the hidden hose on the Air Support HP Pro pump, and thread it onto your Presta valve for secure inflation of your road tires. Designed with a smaller volume chamber for higher-pressure tires, this premium pump allows you to quickly inflate tires up to 120 psi. Stow it in your jersey pocket, or use the included bracket to mount it under your bottle cage. Product details - Premium-quality with smaller volume chamber for higher pressure tires - Inflate to 120 psi (8.25 bar) with little effort - Extendable, hidden hose reduces stress at valve when pumping at higher pressures - Threaded head securely locks onto Presta valves - Compact design fits snugly inside jersey pocket - Mounting bracket fits easily under bottle cage
Bontrager's Air Support HV is a life-saver when you flat out on the trail. A large volume chamber makes it a breeze to use on fat mountain bike tires. It has an easy-to-use thumblock, an auto-selecting head that fits Presta and Schrader valves, plus a fold-out T handle and a dual action for fast inflation. The Air Support HV is compact and light and it comes with a mount to carry it on your frame.
A compact mini pump that easily packs in your jersey pocket or bag and quickly inflates larger volume tires. Packable and powerful The Air Support HV Pro easily packs into a jersey pocket, bag, or pack and provides easy, accessible inflation for larger volume tires. An extendable air hose helps eliminate stress at the valve stem and a larger chamber allows for quick inflation up to 60 PSI. This refined mini-pump features a polished silver finish and comes with an on-bike mount. Product details - High volume air chamber for larger volume tires - Inflate to 60 psi (4.15 bar) with little effort - Extendable, hidden hose reduces stress at valve - Mounting bracket fits easily under bottle cage - Designed to work with Presta valves
Product details - Intended for low and mid-volume pavement tires - Inflates tires to 80 psi (5.5bar) with little effort - Auto-select head locks securely onto Presta or Schrader valves - Fold-out lever securely locks pump head to valve - Mounting bracket fits easily under bottle cage - Easy to read pressure gauge puts information within view
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)
High-volume pump holds securely to bike frames and includes stable folding foot for on-the-go inflation ease. The pump with something to prove The Bontrager Mini Charger is a high-volume, frame-mountable bicycle tire pump that includes a long hose for ease and versatility. A practical folding foot stabilizes while you pump, for faster tire inflation. Product details - High-volume frame mount pump - Stable, folding foot for pumping ease - Long hose gives versatility and saves your valve stems
$19.99 - $24.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more
For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks
Travel-ready tubeless set-up TLR Flash Can makes setting up tubeless tires at home and on the road a breeze. This easily transportable air canister inflates with a traditional pump, and a quick flip of the lever instantly releases stored air for smooth tubeless tire seating. The TLR Flash Can is designed for efficient installation of tubeless ready (TLR) tires without the need for a compressor. Product details - Inflates tubeless ready (TLR) tires without a compressor - Holds up to 160PSI (11 bar) of air pressure - Inflate Flash Can with any Schrader compatible floor pump - A simple flip of the lever releases stored air - Unique 'flash charge' function rushes air into tire - Auto-select head instantly fits both Presta and Schrader valves Specifications - Pump type: Floor - Valve: Presta/Schrader - Gauge type: No gauge - Max pressure: 160psi - Frame mounted: No
High-Volume Floor Pump Made For MTBs. Standard floor pumps go up to 150 psi and beyond—which is way more than you need for mountain bike tires. This one is purpose-built for MTBs. It has an oversized barrel that lets you quickly dial in tire pressure in precise increments, plus a supersized 4” gauge that's easy to see. - Oversized Pump Shaft For Extra Durability. - Pump Head Features Rugged Alloy Cap And Lever. - Super Long 47" Hose To Reach Valves In Stands Or Car Racks. - Convenient Integrated Hose Keeper On Handle. - Psi And Bar Increments On Gauge, With Vibrant Color Matched Background. - 50 Psi, 3.4 Bar Maximum
And you thought you'd never get big air... If you're a tubeless tire convert, you'll wonder how you lived without this pump. Just pressurize the chamber and with a simple flip of the burly switch, all that air floods the tire, giving it no option but to seal and air up. Once the tire's in place, flip the switch back to bypass the chamber and you can top it up accurately with the giant gauge. - Oversized pump shaft for extra durability. - Pump head features rugged alloy cap and lever. - Super long 47" hose to reach valves in stands or car racks. - PSI and Bar increments on gauge, with vibrant color matched background. - 160 PSI, 11.3 Bar maximum - 3150 grams / 6.9lbs.
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)
An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from "CHARGE" to "INFLATE" mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves - Air Chamber: One liter, Store up to 200psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800psi / 124 bar - Material: Aluminum / Rubber / Engineering grade polymer - Flexible hose - Weight: 985g / 2.17oz (Total) 820 g / 1.81lb (Air chamber) - Hose Length: 26 Size - 36 x 11.4 x 8.6cm / 14.2" x 4.5" x 3.4" (Total) - 28.5 x 8.1cm / 11.2" x 3.2" (Air chamber)
Page 1 of 2 Next page