Cables

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2 Double Ended: No Length: 3000 mm Quantity Included: 1

Stainless steel cables are extruded to provide a smooth low-friction surface.

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road , Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Jagwire's Universal Sport Brake XL Cable Kits are the perfect way to enhance your braking performance while adding a little style to your bike, too. Compatible with both mountain and road brakes, and in an extra-long size, the slick stainless cables provide smooth, powerful braking. And with the housing and all the needed parts included, these cable kits are easy to install and ready to deliver years of smooth positive braking.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

- Aluminum straddle cable carrier for cantilever brake

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

- Wet or muddy condition cable sealing solution - 4/6mm

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

Includes: - 1.1mm elite cables (2 x 2300mm) - 4mm reinforced linear strand housing - Ferrules, end caps, frame protectors

- Front or rear brake compatible - Road specific - 1.5mm polished stainless steel cable

Includes - 1.5mm coated cables (1 x 850mm, 1 x 1750mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors

- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable

Stainless steel cables are extruded to provide a smooth, low-friction surface.