10% OFF Your Purchase With Code 10OFF Expires 2/29/20 | See Exclusions

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Saris Locking Cable 8'
$40.99
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Saris Protect-O-Pads
$15.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris Hatch Huggers
$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Saris Locking Hitch Tite (Threaded)
$39.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris Freedom Fat Tire Wheel Holders
$51.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Saris Hitch Tite
$12.99 - $13.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris Wheel Straps (2-Pack)
$10.99
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Race Face Tailgate Pad
$150.00 - $160.00
- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps
Yakima GateKeeper
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
Kuat NV Core Lock Kit
$39.00
Keep the hooligans honest with this all-in-one security solution. It is the perfect upgrade the minimalist NV Core. The NV Core Lock Kit comes with a cable lock to secure your bikes and a threaded hitch lock to tighten and secure your NV Core to your receiver.
Kuat Trio Fork Adapter
$19.00
Thru-axle adapter for the Kuat TRIO rack.
Kuat Dirtbag 9 (Quick-Release)
$13.00
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Kuat Dirtbag 15
$18.99 - $29.00
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Kuat NV Base 2.0 Add-On
$449.00
When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes
Kuat Hitch Lock
$29.00
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
Yakima 15mm x 110 Fork Adapter
$49.00
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Delta Bike Hitch Pro
$29.99
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
Yakima 12mm Fork Adapter
$49.00
The 12 x 100 mm thru-axle adapter allows modern road bikes to quickly secure to any traditional 9 mm fork mount bike tray. A simple thru-axle adapter that allows modern road bikes to quickly secure to any fork-mount bike rack. - 12mm x 100mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Kuat Phat Bike Kit
$9.99
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
Kuat Transfer Lock Kit
$49.00 - $59.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Yakima Fork Adapter
$49.00
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Saris Bike Beam
$42.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Yakima DeadLock
$49.00
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.
Kuat 1.25-inch to 2-inch Adapter
$15.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
Kuat Hi-Lo
$39.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Kuat Ubar
$35.00
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
Kuat NV 2.0 Add-On
$489.00
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes
Saris Trap Fork Mount
$29.99
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Yakima TubeTop
$39.00
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts.
Kuat Dirtbag Phat 15
$29.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
Page 1 of 1